DigiPlus Philippine

List of the table of contents of this article:

• 1. What should I do if the USB disk data backup under the Win7 system is too deep? What to do if the copy file path is too deep
• 2, U disk PE backup data, re-partition, installation system
• 3, How to backup the system with USB disk, how to backup the system with USB disk Method introduction

What should I do if the USB disk data backup under the Win7 system cannot copy the file path is too deep

1. Method 1: Exit the USB flash drive safely. After exiting safely, unplug the USB flash drive from the USB interface of the computer, and then insert the USB flash drive into the computer for data backup operation.

2、Solution: Use anti-virus and DigiPlus Philippineanti-Trojan software to scan the computer and USB flash drive, and do not rule out stubborn viruses. It is recommended to carry out full anti-virus and anti-Trojan horse under the PE system (such as pocket PE). In general, if you encounter a situation where the file path is too deep to access, you can manage these files by using the software that creates the file.

3. Solution: You can try to replace the USB flash drive or other removable disks with the USB socket behind the chassis. Reason 4: There is not enough space on the mobile disk.

4. The path position of the copied document is too deep, and the solution to this situation is very simple. The method is as follows: copy the document to the desktop or the root directory of the disk, and then copy the document to the mobile disk, which can be solved.

USB disk PE backup data, repartition, install system

There are two ways, one is to partition through DiskGenius and other tools under pe, and the other is through the original Windows system partition Tools to partition. Next, the editor will introduce the method of repartitioning the USB disk installation system.

After entering the general PE system, we click the "Ghost Backup Restore" tool on the desktop and select "Run Ghost manually". And enter the GHOST installation interface. 3 Follow the path: Local--Partition--From Image.

Visit https://sogou.37moyu.Com/, download and experience now. Of course, it is most convenient to reinstall the hard disk system, but there are also disadvantages. For example, I need to re-partition the computer, which requires the hard disk to be formatted under the PE system. Therefore, the system needs to be reinstalled in the PE system.

We still can't achieve our goal, so we can only enter pe before operating. After entering the pe system, we need to use a software, that is, adds lossless partition. Generally, the pe system will have this partition software. After opening it, double-click to open it.

There is no good way in this case. You can use the USB flash drive to copy a file to the computer. If it doesn't work, you can only redo the system. You can use the ghost installer in the USB flash drive pe to install the system.

Enter the BIOS setting interface of the computer and set the USB flash drive as the preferred boot item.For specific operations, please refer to the computer manual or relevant tutorials on the Internet. Install the PE system through the USB disk startup: After the production of the PE system is completed, set the boot order of the computer and set it to the USB disk startup.

How to back up the system with USB disk, backup with USB diskSystem method introduction

Steps to backup and restore the system in USB disk boot mode Prepare a new USB disk, and use the disk partition tool to divide two partitions, one NTFS partition and the other FAT32 partition. Put the backup and restore software into the FAT32 sware, open the backup and restore software, and save the backup data of the system to the NTFS sware.

Go to the official website of U boot to download the USB flash drive making tool, and then make a USB flash drive, which is still plugged into the computer. Restart the computer, press the startup shortcut key to start the USB boot, enter the U boot main menu interface, select to run win8pe, enter the pe system desktop, and double-click to open the "Manually run ghost" tool.

Insert the USB flash drive into the computer and turn on my computer.After opening, you will be prompted to format the hard disk. Select the disk you want to partition and click Start. Disk information will be displayed after formatting. After partitioning, the interface of backup function and installation system will appear. Select Management in the pop-up menu and enter the disk management interface.

Restart the computer, use the shortcut key to boot the cabbage USB flash drive into the cabbage main menu, and select [03] to run the cabbage win2003pe enhanced version (old computer). As shown in the figure below, click the Start menu and select Program-WIM Tools-GimageX.