Casino Plus

Win7 64 SP1 (Windows 7 64-bit SP1 system reinstallation strategy) Windows 7 is Casino Plusa popular operating system, which is simple The characteristics of easy-to-use, stable and reliable, and strong compatibility are loved by the majority of users. However, over time, the system may be affected by viruses, crashes and other problems, and needs to be reinstalled.This article will introduce Win7 64 SP1 (Windows 7 64-bit SP1 system reinstallation strategy) to provide detailed guidelines for the majority of users to reinstall the system. I. Back up important data. Before reinstalling the system, you need to back up important data first. Including documents, pictures, music, videos, etc. These data can be stored in an external hard disk or USB flash drive to avoid loss. At the same time, it is also necessary to save a system driver file so that the hardware device can be successfully identified after the installation of the operating system is completed. II. To make a USB boot disk and reinstall the system, you need to use the installation CD or USB boot disk. The specific steps for making a USB boot disk are as follows: 1. Insert the USB flash drive and plug the USB flash drive into the USB port of the computer. Two. Open the command prompt and press the Win+R combination key, open the run dialog box, enter cmd, and press Enter.3. Format the USB disk and enter diskpart, list disk, select disk x (x is the disk number corresponding to the USB disk, depending on the situation), clean, create partition primary, fo in the command prompt Rmat fs=fat32 quick, active. Then enter exit to exit diskpart. Four. Copy the system file to copy all the files in the installation CD or mirror file to the USB flash drive, and ensure the bootability of the USB flash drive. III. When setting the BIOS to start the computer, you need to enter the BIOS settings according to the different brands of computers. In BIOS, you need to put the USB flash drive first in the boot order. When starting the computer, the system files in the USB flash drive will be read automatically.IV. Installation system 1. Restart the computer, insert the made USB boot disk into the computer, and restart the computer. Two. Start installation on the installation interface, and select Start Installation. 3. Accept the terms on the acceptance terms interface, check the agree to the terms and continue. Four. Select Install Driver on the installation driver interface, and choose to install the driver from the USB flash drive. 5. Select the hard disk partition on the hard disk partition interface, select the hard disk partition that needs to install the system, and format it. 6. Wait for the installation to be completed. During the installation process, you need to wait patiently for the computer to restart automatically until the system installation is completed. V. Configuration system 1. Select the time zone, language and user. After the installation of the system, you need to select the time zone, language and user. Connect the computer to the network to ensure that the operating system can be updated normally. Two. After installing the driver installation system, you need to install the hardware driver.You can download the corresponding drivers from the official website of motherboards, graphics cards and other related manufacturers for installation. 3. Install common software. Finally, you can install some common software, such as browsers, music players, office software, etc., in order to better use the computer. Summary Win7 64 SP1 (Windows 7 64-bit SP1 system reinstallation strategy) generally requires steps such as backing up important data, making a USB disk boot disk, setting up BIOS, installing the system, configuring the system, etc. In the specific operation process, it is necessary to pay attention to the security of the backup data, the bootability of the startup disk, the compatibility of the driver, etc. to ensure the smooth completion of the reinstallation system.

Contact Us
Phone：020-83484608