Casino Plus

List of contents of this article:

• 1,Casino Plus How to reinstall the system with a USB flash drive
• 2, U disk reinstall system tutorial
• 3, U disk reinstall system steps

How to reinstall the system with a USB flash drive

. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it intoThe following steps can be omitted from the system USB flash drive), search and download Lao Maotao or Chinese cabbage and other startup USB disk production tools on the Internet, insert the USB disk into the computer and run this software to make a startup USB disk.

Insert the USB flash drive into the computer, restart and press Del or F2 or F1 or F10 or esc and other keys to enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the Enter key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.

Reinstall the system: Set the USB disk to start and enter the installer. After making the boot USB disk, you need to enter the BIOS interface of the computer and set the USB disk as the first boot device. Then restart the computer and enter the system installer under the boot of the USB flash drive.At this time, you only need to follow the prompts of the installer to complete the system reinstallation.

The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other startup USB flash drive production tools on the Internet, and insert the USB flash drive into the computer. This software is made into a boot USB flash drive.

First, download and install the system home one-click reinstall system tool on an available computer, insert an empty USB flash drive of more than 8g, and select the USB flash drive mode to start production. Under this column, select the win10 system that needs to be installed and click to start production.

Reinstalling the system can solve the problem. System USB disk production and reinstalling the systemSteps for making a boot USB flash drive, go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive and omit the following steps). Search and download the installer's USB flash drive startup PE production tool on the Internet, and insert the USB flash drive into the computer to run this software to make a boot USB flash drive.

U disk reinstall system tutorial

Make a USB disk boot disk: Before installing the system, make a USB disk boot disk. The computer first installs software such as "U boot" or Lao Maotao. This time, take U boot as an example.

First, download the Xiaobai one-click reinstall system tool (download address: http://), insert your USB flash drive, select the USB flash drive mode, and click one-click to make a USB flash drive boot disk. Select the operating system you want to install. Here, the editor chooses the win7 system.

If you have made a backup when the installation of the system is completed in the past, you can use the backup to restore the system. If you don't have a backup, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps of restoring the system.

Method/Steps: Method Use the Magic Pig One-click Reinstallation System to complete the USB disk installation. First, download and install the Magic Pig One-click Reinstallation System tool on an available computer and open it, insert a blank USB disk of more than 8g, select the USB disk reinstall system mode, and click to start production.

You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.

Install the system with a USB flash drive. Insert the USB flash drive to start up, press DEL or other keys to enter the BIOS, and set it to start from USB-F10-Y-Enter. Install the system according to the prompts. Pull out the USB flash drive. After the installation is completed, pull out the USB flash drive, and the computer will automatically restart. Click: Start the computer from the local hard disk and continue the installation. Restart the computer. After the installation is completed, restart it.

USB disk reinstallation system steps

1. Make a USB disk boot disk with the cabbage USB disk boot disk making tool to make a USB disk boot disk, and download the genuine system image or pure version image, download the image file suffixed ISO and copy it to the root directory of the USB disk. Press F2 to enter the BIOS settings when the BIOS settings are turned on.

2. There may be an error in the installation of the system. It is best to install the system manually. Do not use Jinshan and 360 to reinstall the system. Next, let's talk about the steps to install the Windows 7 system in the USB flash drive. Insert the USB flash drive into the computer. Because it has been set to start from the USB flash drive, the power-on will automatically start from the USB flash drive.

3. Make a USB disk boot disk, download the u boot USB disk installation tool and install it; connect the blank USB disk to the usb interface, and the USB disk is 8G or above;After the USB disk boot disk production tool reads the USB disk, click to start production, and then wait patiently for the USB disk boot disk production to complete.

4. Slow startup, the way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other USB flash drive production tools on the Internet, and insert the USB flash drive into the power The brain runs this software to start a USB flash drive.

5. Click the "Start" menu, open "Ghost" in the program, and start the Ghost program. The next operation steps are the same as using Ghost to install the system.