TNT Sports

List of catalogs in this article:

• 1, What should I do if the HP computer can't enter the system normally?
• 2, How to reset the system on HP computers?
• 3, HP enter p How to enter e
• 4, What is the system of HP computer
• 5、How to reinstall HP computer system

TNT SportsWhat should I do if I often enter the system?' > What should I do if the HP computer can't enter the system normally?

Check whether the password is correct: Make sure that the password you entered is correct. If you are not sure, you can try to log in to the same account with other devices to confirm whether the password is correct. Check the network connection: If your laptop can't connect to the Internet, you can't log in.

Solution: Remove the power adapter, battery and other external devices. In the absence of power supply equipment, press the power button for about a minute to release it.Do not connect the power supply equipment and leave it for 30 minutes. Do not plug in the battery after static, and only use external power supply.

It means that there is a problem with your system, and it is recommended that you restore or reinstall the operating system. Some computers are pre-installed with the Windows system when they leave the factory. If you are using the HP pre-installed operating system, you can restore the system with the shortcut key "F11" to restore the computer to the factory state to try to solve the problem.

The security mode problem is still the same. It is recommended to back up the data and reinstall the system.

After the system startup options menu comes out, select to enter the safe mode. If you can enter the safe mode normally, you can delete the software or driver installed before the black screen in safe mode. Then restart the machine to see if the laptop can solve the black screen problem.Second, the black screen of the notebook caused by hardware.

This prompt means that no startup device has been found, and it is likely that there is something wrong with the hard disk. Press the F8 key when turning on the power to see if there is an option of "Select to use the latest correct configuration". If you can see "Select to use the most recent correct configuration", select it to see if it enters the system normally.

How to reset the system on HP computers?

When the HP computer reinstalls the system, press ESC to call up the boot menu when starting up, some of which are F12 or F9.

Suggestion: First back up all important data to the hard disk, battery plug and adapter to maintain power supply. Keep pressing the F11 key to turn on the machine, press the call recovery function key, select "Advanced Options", and select "System Restore" to restore the system to the factory state.

Generally, press F2 to enter the system to install the hard disk to start. You can try it yourself. Some are not allowed to install the USB disk. First, enter the bois to set up the USB disk system to install.

The way to solve this problem is as follows: the system restores the previous state, provided that the system needs to create a restore point before to realize the system restore function. Select the desktop icon "Computer" and right-click "Properties". In the system interface, select "System Protection" on the left.

With the help of recovery CD or USB drive, if the system cannot start normally or cannot enter recovery mode, you can use HP recovery CD or create a recovery USB drive to restore the system. If you have a recovery CD, you can insert the CD into the notebook and follow the instructions on the screen.

How to enter HP pe

1. The details are as follows. The pe shortcut keys of HP computers are generally ESC, F9 or F12. Because different models use different operation methods, you need to look at the prompts of the boot interface.

2. First, search [Xiaobai System Official Website] to download Xiaobai software, prepare a blank USB flash drive, and make a boot disk. Just start the production directly according to the guide, and exit the security software when making to avoid intercepting the production failure. After the production is completed, plug in the USB flash drive and restart the computer.

3. Enter the bios settings, plug the USB flash drive into the computer, restart, press the del key to enter the bios when restarting, and set the USB flash drive to start in the bios.

What is the system of HP computer

1. HP-UX is the abbreviation of "Hewlett Packard UniX", which is the operating system of HP series servers; it can be used at HP's PA-RISC The device runs on the computer of Intel's Itanium processor. HP-UX is a multi-user operating system that allows multiple users to use the system at the same time.

2. Brand model: HP Shadow Elf 7 System: Windows 10 Software version: hp is an HP computer. The company, located in Palo Odo, California, USA, is a global information technology company, mainly focusing on printers, digital images, software, computer and information services and other businesses.

3. win7 system: This system is an operating system developed by Microsoft, and the core version number is Windows NT 1. Windows 7 can be used in home and business working environments, laptops, tablets, multimedia centers, etc.

4. A small part is Android. A small part of some HP computer models use Android, and most of them still use Windows system, and there is no Apple system.

5. The system of the HP Star bookpro14 laptop is windows11, which is equipped with the 13th generation intelligent Intel Core i5-13500H standard voltage processor and Intel Torch Xe graphics card.

6. It's win.Mac is a personal consumer computer developed by Apple with "Macintosh" since 1984, such as iMac, Mac mini, Macbook Air, Macbook Pro, Macbook, Mac Pro, etc. Machine. Use a separate Mac OS. The system is a complete and independent operating system.

How to reinstall the HP computer system

1. When the HP computer reinstalls the system, press ESC to call up the boot menu when starting up, some are F12 or F9.

2. Press F2 to enter bios for HP notebooks to set up and then reinstall the system. You can follow the steps below to install the system: put the system CD into the optical drive. Turn on the power and observe the prompts on the screen. Press F2 to set the BIOS before starting the system. Set the startup mode. This setting screen is the BIOS setting.

3. Step 2: Enter the BIOS settings and open the boot menu. Before reinstalling the system, you need to make sure that the computer has been set to start from the USB flash drive or CD instead of from the hard disk.Press the F2 key to enter the BIOS setting interface when the computer is turned on. Use the arrow key to move the cursor to the "Start" tab.