UEFA Champions League standings

List of the contents of this article:

• 1,UEFA Champions League standings How to solve the prompt that the hard disk cannot be found when the computer installs the system
• 2, What should I do if I can't find the hard disk when the USB disk installation system starts?
• 3, What to do if the computer hard disk can't be detected

How to solve the prompts that the hard disk cannot be found when the computer installs the system

1. The reason why the system cannot find the hard disk I: hard disk data cable and Solution to loose, oxidation or broken needle of the power cord: You can try to replace the power connector, data cable or ide/sata hard disk interface for the computer.

2. Search for answers. I want to ask a question. Baidu knows the prompt message and knows that the baby can't find the question_! The problem may have been invalidated.

3. In the process of installing the system, when prompted that the hard disk cannot be found, you can click the driver load button and select the driver downloaded before loading. Hard disk connection problem: Check whether the data cable and power cable of the hard disk are well connected. You can try to plug in and unplug the data cable and power cable of the hard disk to ensure that the connection is stable.

4. Change the hard disk mode to IDEU The solution to the hard disk installation system is to change the hard disk mode to IDE. The specific operation method is as follows: Power---Press F2 to enter the BIOS. After entering the BIOS, you can press the left and right up and down keys to adjust the options, and then select Adv Anced.

5. Using the pure version of Windows mirroring, changing the hard disk mode to AHCI or loading the IRST driver for the mirror image can solve the problem. It prompts that the hard disk cannot be found during installation.

6. The solution to the USB disk installation system can't find the hard disk is to change the hard disk mode to IDE.

What should I do if I can't find the hard disk when the USB disk installation system starts?

First of all, the compatibility problem of the USB disk boot disk itself should be ruled out. You can use the U disk boot disk making tool to remake it, because the deep USB disk is very compatible at present.

Check the USB disk production tool: Make sure that the USB disk production tool used is compatible with the hard disk model and interface. It is recommended to use the officially recommended production tool. Remake the USB disk: If there is an error in the production process of the USB disk, you can try to remake the USB disk to ensure that the production process is correct.

In fact, the USB disk installation system cannot find the hard disk. This phenomenon is likely to be due to the fact that the hard disk mode is not set.

In fact, the main reason why the USB disk installation system can't see the hard disk and C disk is: CDisk partition table error. The C disk has been damaged. The easiest way is to restore the partition table of the C disk by formatting the C disk and repair the C disk.

The hard disk cannot be found when the USB disk starts, because the system booted by the USB disk does not support the hard disk in GPT format, and it can only read the hard disk in MBR format. Solution: Remake the boot USB disk (such as using the latest PE or the installation boot disk with win10), and use it to boot the computer to find the hard disk.

What to do if the computer hard disk cannot be detected

1. It is also possible that the internal damage to the hard disk is damaged. It is recommended to use Master Lu and other hardware detection tools to detect the hard disk. If the hard disk is not detected, we will replace the hard disk power first. Source cable and data cable, replace the hard disk after eliminating the connection problem, and reinstall the system.

2. The data cable and power cable of the hard disk are loose, oxidized or broken, which may cause the computer to fail to detect the hard disk. Try to plug and unplug the hard disk data cable and power cable again, or replace the power connector and data cable interface. The hard disk is not set to an active partition, which may cause the computer to fail to detect the hard disk.

3. If the computer cannot recognize the hard disk, there may be the following solutions: Check the connection: Make sure that the connection between the hard disk and the computer is intact. If it is an external hard disk, try to replace the USB or other data cable to connect. If it is an internal hard disk, check whether the data and power cord are connected normally.

4. When the computer cannot recognize the hard disk, we need to try the following solutions: check whether the hard disk is properly connected: First, we need to confirm whether the hard disk is correctly connected to the computer, including the data cable and power cable.If you find that the connection of the hard disk is loose or loose, you need to reconnect it.

5. Turn off the power and turn off the box, re-plug and unplug the hard disk power cable and data cable (if it is a laptop, you only need to plug and unplug the hard disk), then turn it on, press the DEL key (the notebook is F2 or other) to enter the BOOT tab in CMOS to see if the hard disk information can be detected. If possible, set the hard disk to the first boot item.