DigiPlus Philippine

AM4 processor is DigiPlus PhilippineAMD's latest generation processor, with higher performance and more functions, allowing users to enjoy a faster computing experience. If you want to upgrade your Win7 computer to an AM4 processor, this article will provide you with detailed installation steps. Step 1: Make sure that your motherboard supports the AM4 processor. Before upgrading the AM4 processor, you need to make sure that your motherboard supports the AM4 processor. If your motherboard does not support the AM4 processor, you need to buy a motherboard that can support AM4.You can check the processor models supported by the motherboard in the motherboard manual or the official website of the motherboard. If you are not sure, you can check the CPU slot type on the motherboard. If it is an AM4 slot, the motherboard supports the AM4 processor. Step 2: Back up important data. Before upgrading, you should back up your important data to prevent data loss or damage during the upgrade process. You can copy the data to an external hard disk or cloud storage. Please note that it may take some time to back up data, so you need to plan enough time to back up important data. Step 3: Prepare the AM4 processor and other components. Before upgrading, you need to prepare the AM4 processor and other necessary components. These components include: -AM4 processor-radiator-new motherboard (if youThe existing motherboard does not support the AM4 processor) - thermal conduction - screwdriver - compass - some devices (can help you remove and install the hardware) Step 4: Remove the old processor Before upgrading the AM4 processor, you need to remove the current processor. First, turn off the power and remove the side panel of the chassis. Then, find the slot of the CPU, move the latch to release the pressure plate, and gently pick up the old processor. Please be sure to operate carefully. Step 5: Clean up the old radiator adhesive. After removing the old processor, you need to clean up the old radiator adhesive. You can use some chemical cleaners (such as alcohol) to clean up the glue. Please be sure to operate carefully during the cleaning process to avoid damaging other hardware components. Step 6: Install the new AM4 processor and radiator. Now, you can install the new AM4 processor on the motherboard.First, use some thermal conduction on the CPU slot, then gently place the new AM4 processor on the slot and gently press the wrench. Please be sure to avoid any excessive pressure or breakage of the socket. Next, you need to install a new radiator. Take out the new radiator and screwdriver from the radiator package. Before fixing the radiator, be sure to apply an appropriate layer of heat sink, which can help the radiator better dissipate heat. Gently place the radiator on the AM4 processor and use a screwdriver to fix the radiator. Step 7: Reinstall other components. Now that you have installed the new AM4 processor and radiator, you can reinstall other components. First, put the motherboard back into the chassis and reinsert the power supply and data cable. Then re-fix the chassis side panel. Step 8: Turn on the powerSource and test the new AM4 processor. After the installation is completed, you can turn on the power and test the new AM4 processor. You can enter the BIOS settings, check the information of the processor, and ensure that the processor and the motherboard match. You can also run some benchmarking software to test the performance and stability of the new AM4 processor. In summary, it is not difficult to upgrade a Win7 computer to an AM4 processor, but it requires patience and carefulness. By following the above steps, you should be able to successfully install the new AM4 processor to make your computer more powerful and faster.

Contact Us
Phone：020-83484608