Casino redeem

List of the table of contents of this article:

• 1, How to paste car film tutorial video
• 2, car film tutorial video
• 3、How to stick the car sun film
• 4,Casino redeem How to paste the car film? Illustration of the steps of pasting car glass film by yourself
• 5, How to put a film on the car at home?

How to paste the car film tutorial video

The correct method of pasting the film is as follows: The correct method of pasting the car film is 5 steps: wash the car, measure the size, apply the film, shape it, and check whether there are bubbles.

The first step is to choose a relatively closed space, avoid using fiber towels and cotton wool clothes, and prepare to use materials: a large amount of filtered water, scissors, towels, sprayers, scrapers, etc. The second step is to find a clean piece of glass, spray water on it, stick the car film on the glass, and remove the molding paper from the car film.

Before applying a film to the car, first measure the size of the window and cut the film according to the measured size. Scrub the window glass, completely remove the dirt on the glass, and then clean the water.When pasting the film, tear off the film, spray water evenly on the effective film surface, and then stick it on the car glass to fix it.

Car film tutorial First of all, car film should be in a clean working environment, preferably dry, less dusty or even dust-free. Clean the vehicle in advance and then protect it. Clean each window glass, especially the top and edge of the glass, which is not easy to clean at ordinary times, and then dry the water.

The tutorial steps on how to apply car film include: preparation, film operation, trimming and sorting, etc. Tutorial video on how to apply car film Preparation Before starting to apply the film, first make sure that the surface of the car body is clean and dust-free. Use professional car wash liquid and soft cloth to clean the car body and rinse it with water.

Car StickerFilm tutorial video

Filming steps External cleaning Move clockwise along the car (starting from the position of "1 o'clock" and the position of the passenger's front door). The outer surface of each glass should be well cleaned, the potential dust should be controlled to a minimum extent, and each piece of glass should be slightly lowered to scrub the top of the glass. Department, because there is more dust there.

Video tutorial Before applying the film, first of all, make sure that the working environment meets the requirements of dryness and less dust. Otherwise, dust and debris entering during work will affect the effect of the film. It is recommended to wash the car before applying the film.

Next, let's take a look at the detailed step diagram of car film: Before applying the film, first make sure that the working environment meets the requirements of dryness and less dust, otherwise dust debris will enter during work, which will affect the effect of the film.It is recommended to wash the car before applying the film.

Car wash Ensure that the construction environment is clean, and clean the car windows inside and outside so as not to affect the installation effect later. Cut the appropriate car film according to the size of the glass. The size can be slightly larger, but not smaller, because it will shrink slightly after the hot air blows.

Clean the car glass to be filmed with water. Pay attention to the top and edge of the glass, and then wipe the water dry. Cover the cut film on the outside of the glass, and then fix it with a hot air gun. The function of automobile glass film is heat insulation and sun protection: the film can block a large amount of heat generated by infrared rays.

Check whether there are bubbles between the solar film and the glass, whether the adhesion is strong, whether there are wrinkles, whether there are scratches, etc. If there is no question, clean the water on the edge of the glass with a pure cotton towel.

How to paste the car sun film

1. Cut the car film according to the size of the window. Cutting the film is an important process for the car film. The size of the car cutting film is generally determined by the specific size of the window, and the size is slightly larger than the window. System; baking car solar film, baking film is another very important process in the process of film adhesion.

2. Leave a distance of 5-10mm above the glass to fix the film surface on the car glass. Do not spray water at this time, and fix the film with tape. If the film is cut slightly larger, the excess film should be cut off while avoiding scratching the glass. Generally, 2-3 cm should be left around it and then finely cut.

3. How to apply the car sun film: wipe the glass clean first, and then wipe the dust and oil stains on the glass with a wet cloth.After cleaning the glass, spray water on the glass with a watering can. Don't worry that the sprayed water will affect the viscosity of the thermal insulation film. It only temporarily reduces the viscosity, which is conducive to the pasting of the film.

How to paste the car film? Illustration of the step of pasting the car glass film by yourself

Measure the size of the car window and cut the film according to the size.The size must be suitable. If you can't be sure, the size can be slightly larger, but never smaller. Clean the window glass. This step is very important, because if there is dirt on the glass, even a little, it will affect the effect of the film.

Step 1: Wash the car, clean the inside and outside of the car, and drive the car to a clean and dust-free place and wait for the film to be applied. Step 2: Measure the size of the car window and cut the film according to the size. The size must be appropriate. If you can't grasp it accurately, the size can be slightly larger, but not smaller. Step 3: Clean the window glass.

Next, let's take a look at the detailed step diagram of car film: Before applying the film, first make sure that the working environment meets the requirements of dryness and less dust, otherwise dust debris will enter during work, which will affect the effect of the film.It is recommended to wash the car before applying the film.

The automotive glass film tutorial is as follows: Before applying the film, first ensure that the working environment meets the requirements of dryness and less dust, otherwise dust and debris will enter during work, which will affect the film effect. It is recommended to wash the car before applying the film.

It is best to go to a regular 4s store for professional pasting of car film, or you can apply it manually, but you need a better technique to do it. The following are several steps and illustrations of filming: Completely and thoroughly clean each piece of glass, mainly taking care of the top of the glass.

Car glass film should be thoroughly applied to each piece of glass, apply the window film installation solution to the glass, and then apply the film. Tools: plastic wrap, car film, roasting gun. First, spread the two large bath towels onOn the front cover and instrument, put the chair cover and wrap it tightly with plastic wrap to prevent accidental sticking and damage when the film is applied.

How to put a film on the car at home?

Clean the window glass: The window glass may have more dust due to exposure for a long time, and the adhesion of the car film is poor in places with more dust, so the first thing we need to do before applying the film is to clean the surface of the window.

First of all, we take a watering can, and then fill the watering can with water, and some detergent can also be added to the water. 02 Then we spray water on the glass to be pasted on the car film. After spraying the water, we need to cut the approximate size of the film first.

Buy what you need from the Internet first.Car film, it is much cheaper to stick by yourself than in the 4s store. After buying the car film, cut the car film against the window to be pasted, and the size is slightly larger, as long as the overall shape can be compared.

Car film is a difficult technical work, and the process of filming will also affect the final effect; some car owners have strong hands-on ability and complete tools will choose from their own film.

It is best to go to a regular 4s store for professional pasting of car film, or you can apply it manually, but you need a better technique to do it. The following are several steps and illustrations of filming: Completely and thoroughly clean each piece of glass, mainly taking care of the top of the glass.

Clean the window glass. Spray water on the glass. First, use a hard scraper to scrape off the obvious dirt on the glass, and then use a soft scraper to scrape off the water marks on the glass.Repeat this three or four times until the water is completely cleaned.