Bingo Plus stock

List of contents of this article:

• 1,Bingo Plus stockAcer notebook u disk installation system bios setting tutorial
• 2, Reinstall the system of Acer notebook, how to reinstall the system of Acer laptop
• 3, How to restore the built-in win7 system of Acer notebook | acer restore pre-installed win7 systemTutorial
• 4, How to start the USB disk installation system on Acer notebook
• 5, How to use the Acer notebook USB disk installation system?

Acer notebook u disk installation system bios setting tutorial

1. First, we need to prepare a usb disk and a usb cable. If you are a new computer, you need to prepare a brand-new USB flash drive. Then prepare another USB cable. Press the hotkey to start the made USB flash drive, and the following interface will appear.

2. The method is to start the BOOT menu with the shortcut hot key to enter the USB disk Acer shortcut key is F12. Some computers have enabled F12, but some computers do not enable the F12 shortcut key, so we first go to the BIOS to open the shortcut key F12 and enable it.

3. The shortcut key of Acer is F12, and some computersF12 is enabled, but some computers do not enable the F12 shortcut key, so we must first go to the BIOS to open the shortcut key F12 and enable it. After booting into the logo screen, press the F2 key to enter the BIOS.

4. Acer laptop enters the BIOS to set up the USB disk startup method. First, use the USB disk startup shortcut key to directly enter the USB disk installation system. The Acer notebook USB disk startup shortcut key is F12. After connecting the made quick boot USB disk USB disk startup disk production tutorial to the computer, restart the computer. , after seeing the boot screen, press F12 wildly and a startup will appear.

5. Step 5: Start installing the system. After saving the modification, exit the BIOS settings. The USB disk will start automatically, and you can start installing the Win10 system. During the installation process, root is required.Fill in some setting information according to the prompts, such as region, language, time zone, etc., and finally complete the system installation.

6. Use the shortcut hotkey to start the BOOT menu to enter the USB disk Acer shortcut key is F12. Some computers have enabled F12, but some computers have not enabled the F12 shortcut key, so we must first go to the BIOS to open the shortcut key F12 and enable it.

Acer notebook reinstall system, how to reinstall the Acer laptop system

Double-click to open the Xiaobai one-click reinstall system tool, wait for the local environment Test. When the system selection interface appears, it is generally recommended to install the recommended system, click Expand, and then click Install This System.

Step 1: Prepare a USB flash drive. First of all, you need to prepare a USB flash drive with a capacity of more than 4GB. Save the USB flash drive in a dry place to ensure that it will not be contaminated. Then plug it into the USB port of the computer and wait for the system to automatically recognize and assign the disk character.

The necessity of reinstalling the system in Acer believes that many computer usersYou will encounter that the computer system becomes very slow or there are some unsolvable problems. At this time, you need to reinstall the computer system.

acer4750G is an all-round student laptop, which is popular with users for its high cost performance. We know that computers inevitably encounter problems in the process of use, and Acer 4750g is no exception. If the system fails, the system needs to be reinstalled, so how about acer4750g? What about reinstalling the system? Next, the editor will introduce the steps to reinstall the Acer 4750g system.

Laptops are easy to carry and are the first choice of most consumers, such as macro_ (acer) notebooks. However, whether it is a desktop computer or a laptop, if the system fails, the system needs to be reinstalled. So how to reinstall the macro_notebook?Next, the editor will share with you the tutorial of reinstalling the acer laptop system.

How to restore the built-in win7 system of Acer notebook | acer restore pre-installed win7 system tutorial

1. Open the acer computer , select to start the Windows 10 system normally in the window, enter the Windows 10 system, and find [Settings] in the start menu. Click [Update and Security] in the settings, and then click to enter the interface. Click [Restore] on the setting interface and click Enter. Select the [Start] button in the window.

2. Download: Download and install Ace on the homepage of Acer's official websiteR Recovery Management (can be searched and downloaded on the Internet) Open Acer Recovery Management in the start list. There are two options to choose from when opening: restore factory settings (reset my computer) or custom restore ( Refresh my computer).

3. First of all, check whether the system restore is turned on: right-click My Computer to select Properties/System Restore/uncheck "Turn off System Restore on All Drives", and then press Apply.

4. System first aid kit: ps: If you use Xiaobai to reinstall the system with one click, there is a black screen or the inability to turn on and the loss of system files, please don't worry. It is recommended that you click the corresponding portal.

5. Press F8 to restore the factory state, that is, what you look like when you leave the factory.That is to say, even the vista system and all the software are gone. So it can't be restored by itself. If you want to install it by yourself, you can install it again. If there is no installation disk, you'd better go to the warranty center to reinstall the system.

6. First, open the control panel in the start menu. After opening the control panel, open the backup and restore options in the many options of the control panel. As shown in the figure.

How to start the USB disk installation system on Acer notebook

1. Step 1: Prepare a USB flash drive. First of all, you need to prepare a USB disk with a capacity of more than 4GB, save the USB disk in a dry place to ensure that it is not It will be polluted. Then plug it into the USB port of the computer and wait for the system to automatically recognize and assign the disk character.

2. Insert the USB boot disk into the USB interface of the computer, and then turn it on. When using the USB boot disk for the first time, the computer will not automatically enter the interface of bios settings. When using it for the second time, the computer will automatically enter the PE system of win7, where you can back up the ghostWindows7 image we saved in the USB flash drive.

3. The method is to start the BOOT menu with the shortcut hotkey to enter the USB disk Acer. The shortcut key is F12. Some computers enable F12, but some computers do not enable the F12 shortcut key, so we should first go to the BIOS to open the shortcut key F12 and enable it.

4. Start the USB flash drive and insert the USB flash drive into the Acer computer, restart the computer and press F12, select the USB HDD option to enter, and start from the USB flash drive.Run the PE system on the main interface of the USB disk, select [02] to return to run the PE system. One-click installation to enter the PE system, open [PE one-click installation tool], select the installation on the C disk symbol, and click OK.

How to use the Acer notebook USB disk installation system?

Step 1: Prepare a USB flash drive. First of all, you need to prepare a USB flash drive with a capacity of more than 4GB. Save the USB flash drive in a dry place to ensure that it will not be contaminated. Then plug it into the USB port of the computer and wait for the system to automatically recognize and assign the disk character.

Use the decompression software to decompress the GHO file in the system image to the GHO directory of the USB boot disk. Start the USB flash drive and insert the USB flash drive into the Acer computer, restart the computer and press F12. Select the USB HDD option to press and start from the USB flash drive.Run the PE system on the main interface of the USB disk, select [02] to return to run the PE system.

Operation steps: First of all, we prepare a USB flash drive. What we want to explain here is that we must separate the hard disk when we use the USB flash drive to install the system. If your computer doesn't have a hard disk partition, you can put it somewhere else.

If you have made a backup when the installation of the system is completed in the past, you can use the backup to restore the system. If you don't have a backup, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps of restoring the system.

After making the USB boot disk, copy the downloaded notebook system iso file directly to the directory of the USB disk. Insert the USB flash drive into the USB interface of the notebook that needs to reinstall the system to start.Start from the USB flash drive to start the pe system. Re-partition after entering the pe system.