UEFA EURO

List of catalogs in this article:

• 1,< A href='#Where is the timing mark of China Junjie Mitsubishi 4g93 engine?' title='Where is the timing mark of Zhonghua Junjie Mitsubishi 4g93 engine?' > Where is the timing mark of China Junjie Mitsubishi 4g93 engine?
• 2, What is the difference between Mitsubishi 4G93 and Mitsubishi 4G92?
• 3、 Is the Mitsubishi 4G93M engine reliable?
• 4、How about Mitsubishi 4G93D

Where is the timing mark of China Junjie Mitsubishi 4g93 engine?

Slowly shake the crankshaft. When you hear the deflation sound, it means that the first cylinder is compressing the stroke. Open the inspection hole cover on the flywheel shell, and then slowly shake the crankshaft to align the timing mark. If there is an octane selector, it should be adjusted to the scale position of 0.

The method of timing the six-cylinder Mitsubishi Pajero is: turn the intake and exhaust camshaft to a relative horizontal position, and fix the front cover of the crankshaft pulley to complete the timing belt.The car camshaft mark has a notch on the back cover. It's easy to see, just observe it carefully.

G93, such as D3 to D4, is this on Huachen Junjie, but the yellow shell channel is better, torque, Zhonghua Junjie FSV is on the market, these two engines are in Zhonghua frv1 torque, Zhonghua Junjie FSV is on the market, and these two engines are not used in Zhonghua frv. There is a big difference. The price is stable and the listing is backward.

align the timing marker of the chain with the timing marker on the camshaft sprocket; install the oil pump drive sprocket to align the timing marker of the chain with the timing marker on the oil pump sprocket; first, align the timing marker on the camshaft sprocket with the timing marker on the bearing cover; rotate the crankshaft to make the cylinder piston position At the upper stop position.

What is the difference between Mitsubishi 4G93 and Mitsubishi 4G92?

1. The domestic 4G93 is a DOHC structure. In order to adapt to the domestic fuel situation, the in-cylinder direct injection technology has been removed, and the compression ratio can adapt to No. 93 gasoline. The data of 100 kilowatts and 136 horsepower are moderate. 4 The valve structure and DOHC structure make the maximum power of this engine explode relatively late - around 6,500 rm.

2, G18, 4G92, 4G93, and the latest 4G15 Shenyang aerospace products: 4G64 The driving force is the 4G18 from Dong'an Power. 4G18 has used two sets of electronic systems so far, the original Mitsubishi Denso system (has been discontinued), and now The connected power system (i.e. Bosch) The heart-warming system is Bosch's.

3. Mitsubishi 4G engine: The engine developed by Mitsubishi has an exhaust volume of 1834cm3. It adopts the technology of directly spraying gasoline into the cylinder GDI (gasolinedirectinjection), which means that the gasoline is directly injected into the cylinder, by The oil is directly sprayed into the cylinder to achieve high-response and high-precision fuel control.

4. Relatively speaking, the stability of the Mitsubishi engine is still good. This engine is equipped with two balance shafts, which are distributed on both sides of the engine and combined with the crankshaft to form a better balance.

Is the Mitsubishi 4G93M engine reliable?

1. Relatively speaking, the stability of the Mitsubishi engine is still good. This engine is equipped with two balance shafts, distributed on both sides of the engine, combined with the crankshaft to form a better balance.

2. Judging from the feedback data, the new engine has a maximum horsepower of 197Ps and a peak torque of 285n·m, which is significantly lower than the 5T Earth Dream (142 kw/243n·m) equipped with Honda CR-V, which is still at the mainstream level.In addition, the external transmission is matched with a 7-speed wet dual-clutch gearbox, which can achieve excellent economic performance with a fuel consumption of 6L per 100 kilometers.

3. The G9 series engine is an advanced product with high performance and high reliability, which is used in China's medium and luxury cars, MPVs and SUVs.

How about Mitsubishi 4G93D

1. In general, it seems that the technical content of 4G18 is worse~~ But 4G93 is not as good as anywhere~~ Although there is no base highlight~~ But it is very reliable Durable~~ Advantages: Compact structural design, smaller size and lighter in quality compared with engines with the same displacement.

2. G93 is mainly used for Huachen Junjie, Zunchi, Kubao and FengxingjingYi, Hafei Leopard and Heyue, the technology is quite mature. Hafei Leopard is the first Chinese coupe. Isn't it mature enough to use this engine? Not to mention the power, the fuel consumption is also good, and the noise is very small.

3. The brand is Mitsubishi Engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.