UEFA TV

Engine crankshaft: The UEFA TVcore of car power The car engine is the core of a car, and the crankshaft is the core of the engine. The crankshaft is one of the key parts of the engine and the main part that controls the power of the car. The crankshaft of the car engine converts fuel combustion into power through accurate rotation, so that the car can operate normally.Next, we will learn how the engine crankshaft works and how to maintain it. The working principle of the engine crankshaft The engine crankshaft is a device used to convert chemical energy into mechanical energy. Its main function is to convert the chemical energy compressed by the combustion gas in the gasoline engine into mechanical power. It is mainly composed of a long straight steel rod, and the two ends of the steel rod are connected to several rotatable "curved arms", and a piston will be placed on each curved arm. When the piston moves down, it will be connected to the arm on the crankshaft through the connecting rod, thus turning the crankshaft and generating power. The rotation of the crankshaft is very accurate, and the movement speed of each curved arm is also very accurate. This accuracy is very important, because if the speed of motion of the crankshaft is inaccurate, it will cause the whole engine to work abnormally. Therefore, in the event of an engine failure, the engine crankshaft is one of the primary parts to check.Crankshaft maintenance and maintenance Engine crankshaft is a high-precision device, which often needs to be maintained to ensure the normal operation of the car. The following are some suggestions for maintaining the crankshaft: 1. Replace the crankshaft bearing. The crankshaft bearing should be replaced regularly to ensure the smooth and stable movement of the crankshaft. The service life of the crankshaft bearing will vary depending on the frequency of use, purpose and other factors. Two. Regular replacement of waste oil is a necessary maintenance for cars. For crankshafts, replacing waste oil helps to maintain the cleanliness of the oil in the crankshaft and reduce the damage caused by sediments and other particles to the crankshaft. More advanced cars will recommend a plan to replace waste oil according to the working environment and working hours of the crankshaft. Timely replacement can effectively extend the service life of the crankshaft. 3. Keep the crankshaft clean. The car crankshaft is in a sticky and debris-prone environment, so it needs to be cleaned regularly.Cleaning up some debris and sediments on the surface of the crankshaft can reduce friction and increase fluidity, so as to maintain its smooth and normal operation. Four. Check the degree of wear of the crankshaft. Regularly check the degree of wear of the crankshaft to find problems in advance and take measures to avoid damage to the crankshaft in time. When the crankshaft is found to be seriously worn, it is recommended to replace the entire crankshaft device to ensure the safety and stability of the car. If the crankshaft is only slightly worn, it needs to be repaired or replaced. Conclusion The engine crankshaft is the core part of the automobile power system and the key component that converts the chemical energy of fuel into mechanical energy. Due to its high-precision working style, it needs frequent maintenance to ensure its long-term stable and safe work. If you want your car to work normally all the time, the maintenance of the crankshaft is crucial.

Contact Us
Phone：020-83484608