TNT Sports

List of the catalog of this article:

• 1,TNT Sports How to remove car film
• 2, How to tear off the car film
• 3, How to quickly remove car glass film

How to remove car film

1. Method cleaning liquid Removal method If you have a glue removal knife, you can cut it with a knife. Be careful not to scratch the car, or ask the master of the car beauty shop to help remove it directly. Then go to buy some cleaning liquid. Wash it repeatedly with detergent until you are satisfied., if it can't be cleaned, cut it with a knife, and then use cleaning liquid.

2. The methods of removing the car glass film include: tearing it off directly, removing it with edible vinegar, removing wind oil essence, and removing it with alcohol. Tear off the inferior film directly. It is easier to deal with. The adhesive strength of this film is not particularly good, and it is easier to remove.

3. If you have tools, repeat the above process. If it can't be cleaned, cut it with a knife, and then wash it with cleaning solution. Quickly remove the old car film. However, if you want to remove the old car film quickly, you'd better go to the construction shop to find a driver. If you choose to apply a new film, the work of removing the car film is free of charge.

How to tear off the car film

Tear it off directly. The inferior film is quite easy to handle. The bonding strength of this film is not particularly good, and it is quite easy to remove.High-quality car film is quite difficult to make. You need to find a master or buy professional tools by yourself. The key to professional tools is the glue removal knife.

You can use fingernails or harder cards to lift one corner of the car film. If it still doesn't work, you need to use a wallpaper knife. Tear off the car film slowly. If you want to be faster, you can tear off the film with the heat of the hot fan, because the stickiness of the glue can decrease after heating.

The steps are as follows: the owner needs to use a wallpaper knife to pry open the corner of the window film and pay attention not to damage the glass. Pull the corner of the car film and slowly tear off the car film. Do not use brute force to prevent damage to the car glass. When encountering a place that is difficult to tear, you can use a wallpaper knife to cut off the glue connected to the place that is difficult to tear.

First, use nailsOr scrape a corner of the car film with a wallpaper knife, then use the hot air of the hair dryer, and then slowly tear off the car film with a soft force. If there is residual glass film glue after tearing, it can be cleaned with glue remover.

Scrape little by little with a blade, (if it doesn't work even if it's heated, sometimes the second layer can be torn off after heating) 3: The rear windshield has a heating line, which can't be scraped with a blade, spray water with a cleaning ball to remove glue, or use a plastic scraper for film, you may not have it.

The way to quickly remove the car glass film is: use a hard card or wallpaper knife to lift a corner of the car film, and then slowly tear off the car film. When tearing the car film, do not use too much force. It is best to use the hot air of the hair dryer to conduct heat to the position of the car film, which can reduce the stickiness of the car film. Sex, the car film is easier to remove.

How to quickly remove the car glass film

1. The method of removing the car glass film, such as: tear it off directly, eat Vinegar removal, wind oil essence removal, alcohol removal. Tear off the inferior film directly. It is easier to deal with. The adhesive strength of this film is not particularly good, and it is easier to remove.

2. The way to quickly remove the car glass film is: use a hard card or wallpaper knife to lift a corner of the car film, and then slowly tear off the car film. When tearing the car film, do not use too much force. It is best to use the hot air of the hair dryer to conduct heat to the position of the car film, which can reduce the stickiness of the car film. , the car film is easier to remove.

3. The method of quick removal of automobile glass film is as follows: sunlight and ammonia: this method can only be carried out on a sunny day.

4. The recommended method of quickly removing the film on the car is as follows: Physical removal method: use an electric hair dryer to heat back and forth with hot air around the logo sticker for a period of time, and then all kinds of car film stickers can be removed. Chemical removal method: After wiping with wind oil essence, wait for a few minutes to wipe with a dry cloth, and the glue marks will slowly fall off without leaving any traces.