Europa League app

List of the table of contents of this article:

• 1,Europa League app Laptop System Installation Tutorial
• 2, Steps to start and install the system of ASUS laptop usb disk
• 3, How to install the system by yourself
• 4, How to reinstall the system on HP laptop

laptop system installation tutorial

1. There are three ways to install the system on the notebook, hard disk, USB flash drive or The CD-ROM installation system. CD-ROM installation system CD-ROM installation system, you need to prepare the system installation CD-ROM, put the CD-ROM into the optical drive, restart the computer, select the optical drive to start, and follow the prompts.

2. Windows will automatically create a boot partition. Select OK here. After creating the C disk, the system reserved disk will be automatically generated, don't worry about it.

3. Start GHOST on the desktop of the PE system, and then mirror the system file to the system disk.(C disk) Exit GHOST after mirroring, and then restart the computer for system installation. When the system is installed, just restart the computer.

4. The steps for installing the system on Shenzhou laptop are as follows. After making the wepe boot disk, copy the iso image of the win10 system directly to the USB disk. The micrope boot disk supports larger than the 4G image.

5. The specific steps to install the computer system are as follows: the first step is to download Onekey ghost and Win7 system images. The download address is in the above tools/raw materials. Note: After downloading, please do not save it on the C drive (the desktop is also a folder in the C drive, so it cannot be saved on the desktop).

ASUS laptop USB flash drive startup installation system steps

When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.

Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.

Disabled.Enter the [Boot] menu through the arrow keys, and select [CSM Support] or [Launch CSM] through the arrow keys to set it to Enabled. After completing the above two settings, please press F10 to save and exit. Press the [ESC] key again and choose to start from the USB device.

When the ASUS notebook enters the BIOS, press the power switch and click the F2 key. ASUS notebook sets the USB flash drive as the first boot item. You must plug in the USB flash drive before booting, and then enter the BIOS to see the inserted USB flash drive device in the boot item.

Plug in the USB flash drive, restart the computer, press f2 or f12 to enter the bios, set the USB flash drive to priority in the bootpriority, press f10 to save and exit, and enter the pe system;Select the one-click restore tool on the desktop, and then select the installation partition of the original system, the gho system file in the USB flash drive, and select OK.

Asus notebook sets the USB flash drive to start. The operation method is as follows: press the ESC key (different brands of BIOS hotkeys are no longer available. ASUS notebook is ESC. If it is invalid, press the notebook generally F2 to operate) to enter the BIOS setting interface.

How to install the newly bought laptop by yourself

Hard disk installation: The hard disk installation method does not require a USB flash drive and CD-ROM. After downloading the system image, decompress the file to the root directory of other disks except the C disk, but Then run the decompressed hard disk installation.exe to open the installer.

Laptops are generally the best systems of the original generation of the factory. After being tested and optimized by the manufacturer, they are most suitable for local use. If you download it by yourself, try to choose the system matched by the manufacturer. Although the original pure installation version of the original pure installation version is good, although the comprehensive installation has comprehensive functions, the hardware driver needs to be installed after installation.

Download ISO image (2) Use the UltraISO file to write the system ISO to the USB flash drive. ( 3) Adjust the USB flash drive to the first startup item on the BIOS interface (you can also use the computer USB flash drive to start the hotkey). ( 4) Insert the USB flash drive and restart the computer, and you will automatically enter the installation interface of the installer. Follow the prompts to complete the installation.

Of course, you can reinstall the system by yourself, and use Xiaobai to reinstall the system software with one click., you can reinstall the system with one click more conveniently and quickly. The specific operation is as follows: turn off the anti-virus software on the computer, open the Xiaobai one-click reinstall system software, and then the interface as shown in the figure will appear. Click on the win10 system that needs to be installed.

The newly bought Lenovo laptops generally come with their own windows system, and now they come with the win10 system. However, some models do not have a system, only a dos environment, and users can only install the system by themselves.

How to reinstall the system on HP laptop

1. When reinstalling the system on an HP computer, press E when starting up SC calls up the startup menu, some of which are F12 or F9.

2. How to reinstall the system: Download a USB disk pe installer, which has a lot of, such as old hairy peach, cabbage, etc.

3. HP Shadow Elf 1st generation can install win7. The installation steps are as follows. Open Dr. Han Installation Master on the desktop and click "Start Installation" system to start environmental detection. Choose from the various system files provided and find the appropriate win7 system file for download and installation.The steps are as follows: Insert the installed USB flash drive into the USB interface of the computer and press the power button.

4. How to reinstall the system on HP laptops: set up the boot USB flash drive: HP computer has a special function, that is, press the Esc key, and the startup menu will appear as shown in the figure: the function of each key has its own description.